Robotik-AG des Gymnasiums Markt Indersdorf
If you know Team MAI, then you know our love for themes at robotic competitions. 🙂 Take a look at a selection of our former costumes… 2014/2015: We were monks with glowing auras. And although there was no collusion, team HRS appeared in a similar theme. 2015/2016: There were some … Weiterlesen …
Here’s Team „Schüler bauen Roboter“ again. We have accomplished some further goals. We finished the 3D model for the tires and got ourselves flange couplings. We also thought about the translation and to test it we ordered a belt drive and a worm drive, which we’re going to do in the … Weiterlesen …
As we have mentioned earlier, we have modelled some of the components of the student robotics kit. It was a lot of work for us to design those in the first place, so we figured other teams might want to use those, so we have decided to make these models … Weiterlesen …
In the last weeks we made a ton of progress: Vacuum system We found out, that our vacuum-system doesn´t work. We didn’t have enough thrust to suck enough air in, so we can´t put the balls into the bot. The problem was on our engine, which had too few resistance … Weiterlesen …
We are working on building an arm to be able to grab tokens. For the purpose of stability it is made from wood, which makes it also quite heavy, that’s why we’re thinking about designing some of the components to fixate it ourselves. Also, we still need to buy some … Weiterlesen …
Here’s Team „Schüler bauen Roboter“ again. We have accomplished many goals . We have improved our battery holder, installed the sensors, ordered the components for the wheels and last but not least, built the ramp. In the near future we want to continue working on the robot wheels and attach … Weiterlesen …
After a lot of testing and writing parts we are now able to present our simulator bot doing something he may possibly also do in the virtual competition: He is using a marker as an orientation to then go and grab a gold token from the enemy scoring zone and … Weiterlesen …
For testing purposes, we decided to build a plinth. We tried to make it as stable as possible, but also had to find a solution to be able to transport it: The arms can be fixated with screws and are therefore also easily removable. And of course, even though you … Weiterlesen …
We made good progress in the last weeks, for example: (author: Lucian)
This Week we installed the suction system on to our bot: We also tested the resistance of our suction system: After some experimenting we got our results which were good: (author: Lucian)